|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Excellent just what I needed to replace the electrolytic caps and make this old gem a beauty again. Was as scan of the original photocopied service manual.
;
It was helpful to get schematic with waveforms in important points and lot of service information. Manual is good quality, fast delivered. Of course it is hardcopy of paper one with all its disadvantages.
 ;
I want to give you a real heads-up for your desire to enable such people as I to acquire the information I need to maintain the older types of equipment such as this Akai HXA351W. You do a swell job with all the processes you have to perform so I can have a legible, thus usable
document which does not send me crazy trying to figure out the blurry text of a bad copy.
Very well done, Thomas.
;
This manual is very well presented and after printing out looks about as close to an original as I think you can get. The quality is second to none.
The content of the manual is comprehensive and I think it would be well suited to an audio repair professional which I'm not but I did find it very informative and helpful.
The cost of the manual is more than covered by the money I'll save when I change the keep memory battery now I have the relavant info.
Very pleased with my purchase and can recommend it wholeheartedly as I can other manuals I've downloaded from this site.
Regards
Limey Alex
;
Complete manual including mechanical part in good pdf quality. Shaded greys of the pcb due to pdf not perfect but usable.
(B) No Sound
No Sound. YES Check the Vcc of IC751 Pins1, 11, 19, 22, 33. YES Check the Tuner SiF signal at IC751 Pin2. YES Check the oscillator of IC751 Pins5, 6. YES Check the Audio of IC751 Pins30, 31. YES Check the Audio of IC801 Pins2, 3. YES Check the Audio of IC801 Pins16, 17. YES Check the Audio of IC802 Pins22, 26. YES Check the Signal flow from IC802 Pins22, 26, SC901 Pins1, 3. NO Check the signal flow from IC801 Pins16, 17 to IC802 Pins10, 16. NO Check the IIC Clock and Data at IC801 Pins42, 43. NO Check the signal flow from IC751 Pins30, 31 to IC801 Pins2, 3. NO Check the IIC Clock and Data at IC751 Pins12, 13. NO Replace X751 NO Check the Tuner SIF of TU701 Pin22. NO Check 5.0V Line.
3-19
|
|
|
> |
|
